객체 프로토콜

PyObject *Py_GetConstant(unsigned int constant_id)
Part of the 안정 ABI 버전 3.13 이후로.

Get a strong reference to a constant.

Set an exception and return NULL if constant_id is invalid.

constant_id must be one of these constant identifiers:

Constant Identifier

Value

Returned object

Py_CONSTANT_NONE

0

None

Py_CONSTANT_FALSE

1

False

Py_CONSTANT_TRUE

2

True

Py_CONSTANT_ELLIPSIS

3

Ellipsis

Py_CONSTANT_NOT_IMPLEMENTED

4

NotImplemented

Py_CONSTANT_ZERO

5

0

Py_CONSTANT_ONE

6

1

Py_CONSTANT_EMPTY_STR

7

''

Py_CONSTANT_EMPTY_BYTES

8

b''

Py_CONSTANT_EMPTY_TUPLE

9

()

Numeric values are only given for projects which cannot use the constant identifiers.

Added in version 3.13.

CPython 구현 상세: In CPython, all of these constants are immortal.

PyObject *Py_GetConstantBorrowed(unsigned int constant_id)
Part of the 안정 ABI 버전 3.13 이후로.

Similar to Py_GetConstant(), but return a borrowed reference.

This function is primarily intended for backwards compatibility: using Py_GetConstant() is recommended for new code.

The reference is borrowed from the interpreter, and is valid until the interpreter finalization.

Added in version 3.13.

PyObject *Py_NotImplemented

지정된 형 조합에 대해 연산이 구현되지 않았음을 알리는 데 사용되는 NotImplemented 싱글톤.

Py_RETURN_NOTIMPLEMENTED

C 함수 내에서 Py_NotImplemented 반환을 올바르게 처리합니다 (즉, NotImplemented에 대한 새로운 강한 참조를 만들고 반환합니다).

Py_PRINT_RAW

Flag to be used with multiple functions that print the object (like PyObject_Print() and PyFile_WriteObject()). If passed, these function would use the str() of the object instead of the repr().

int PyObject_Print(PyObject *o, FILE *fp, int flags)

파일 fp에 객체 o를 인쇄합니다. 에러 시 -1을 반환합니다. flags 인자는 특정 인쇄 옵션을 활성화하는 데 사용됩니다. 현재 지원되는 유일한 옵션은 Py_PRINT_RAW입니다; 주어지면, repr() 대신 객체의 str()이 기록됩니다.

int PyObject_HasAttrWithError(PyObject *o, PyObject *attr_name)
Part of the 안정 ABI 버전 3.13 이후로.

oattr_name 어트리뷰트가 있으면 1을, 그렇지 않으면 0을 반환합니다. 이것은 파이썬 표현식 hasattr(o, attr_name)과 동등합니다. 실패하면, -1을 반환합니다.

Added in version 3.13.

int PyObject_HasAttrStringWithError(PyObject *o, const char *attr_name)
Part of the 안정 ABI 버전 3.13 이후로.

This is the same as PyObject_HasAttrWithError(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Added in version 3.13.

int PyObject_HasAttr(PyObject *o, PyObject *attr_name)
Part of the 안정 ABI.

oattr_name 어트리뷰트가 있으면 1을, 그렇지 않으면 0을 반환합니다. 이 함수는 항상 성공합니다.

참고

Exceptions that occur when this calls __getattr__() and __getattribute__() methods aren’t propagated, but instead given to sys.unraisablehook(). For proper error handling, use PyObject_HasAttrWithError(), PyObject_GetOptionalAttr() or PyObject_GetAttr() instead.

int PyObject_HasAttrString(PyObject *o, const char *attr_name)
Part of the 안정 ABI.

This is the same as PyObject_HasAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

참고

__getattr__()__getattribute__() 메서드를 호출할 때나 임시 str 객체를 만드는 중에 발생하는 예외는 조용히 무시됩니다. 적절한 에러 처리를 위해서는, 대신 PyObject_HasAttrStringWithError(), PyObject_GetOptionalAttrString() 또는 PyObject_GetAttrString()을 사용하십시오.

PyObject *PyObject_GetAttr(PyObject *o, PyObject *attr_name)
반환값: 새 참조. Part of the 안정 ABI.

객체 o에서 attr_name이라는 이름의 어트리뷰트를 가져옵니다. 성공하면 어트리뷰트 값을, 실패하면 NULL을 반환합니다. 이것은 파이썬 표현식 o.attr_name과 동등합니다.

If the missing attribute should not be treated as a failure, you can use PyObject_GetOptionalAttr() instead.

PyObject *PyObject_GetAttrString(PyObject *o, const char *attr_name)
반환값: 새 참조. Part of the 안정 ABI.

This is the same as PyObject_GetAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

If the missing attribute should not be treated as a failure, you can use PyObject_GetOptionalAttrString() instead.

int PyObject_GetOptionalAttr(PyObject *obj, PyObject *attr_name, PyObject **result);
Part of the 안정 ABI 버전 3.13 이후로.

Variant of PyObject_GetAttr() which doesn’t raise AttributeError if the attribute is not found.

If the attribute is found, return 1 and set *result to a new strong reference to the attribute. If the attribute is not found, return 0 and set *result to NULL; the AttributeError is silenced. If an error other than AttributeError is raised, return -1 and set *result to NULL.

Added in version 3.13.

int PyObject_GetOptionalAttrString(PyObject *obj, const char *attr_name, PyObject **result);
Part of the 안정 ABI 버전 3.13 이후로.

This is the same as PyObject_GetOptionalAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Added in version 3.13.

PyObject *PyObject_GenericGetAttr(PyObject *o, PyObject *name)
반환값: 새 참조. Part of the 안정 ABI.

형 객체의 tp_getattro 슬롯에 배치되는 일반 어트리뷰트 게터(getter) 함수. 객체의 (있다면) __dict__에 있는 어트리뷰트뿐만 아니라 객체의 MRO에 있는 클래스의 딕셔너리에 있는 디스크립터를 찾습니다. 디스크립터 구현하기에 요약된 것처럼, 데이터 디스크립터는 인스턴스 어트리뷰트보다 우선하지만, 비 데이터 디스크립터는 그렇지 않습니다. 그렇지 않으면, AttributeError가 발생합니다.

int PyObject_SetAttr(PyObject *o, PyObject *attr_name, PyObject *v)
Part of the 안정 ABI.

객체 o에 대해, attr_name이라는 이름의 어트리뷰트 값을 v 값으로 설정합니다. 실패 시 예외를 발생시키고 -1을 반환합니다. 성공하면 0을 반환합니다. 이것은 파이썬 문장 o.attr_name = v와 동등합니다.

vNULL이면, 어트리뷰트가 삭제됩니다. 이 동작은 폐지되었고 PyObject_DelAttr()로 대체되었습니다만, 현재 제거할 계획이 없습니다.

int PyObject_SetAttrString(PyObject *o, const char *attr_name, PyObject *v)
Part of the 안정 ABI.

This is the same as PyObject_SetAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

vNULL이면, 어트리뷰트가 삭제되지만, 이 기능은 폐지되었고 PyObject_DelAttrString()으로 대체되었습니다.

The number of different attribute names passed to this function should be kept small, usually by using a statically allocated string as attr_name. For attribute names that aren’t known at compile time, prefer calling PyUnicode_FromString() and PyObject_SetAttr() directly. For more details, see PyUnicode_InternFromString(), which may be used internally to create a key object.

int PyObject_GenericSetAttr(PyObject *o, PyObject *name, PyObject *value)
Part of the 안정 ABI.

형 객체의 tp_setattro 슬롯에 배치되는 일반 어트리뷰트 세터(setter)와 딜리터(deleter) 함수. 객체의 MRO에 있는 클래스의 딕셔너리에서 데이터 디스크립터를 찾고, 발견되면 인스턴스 딕셔너리에 있는 어트리뷰트를 설정하거나 삭제하는 것보다 우선합니다. 그렇지 않으면, 객체의 (있다면) __dict__에서 어트리뷰트가 설정되거나 삭제됩니다. 성공하면 0이 반환되고, 그렇지 않으면 AttributeError가 발생하고 -1이 반환됩니다.

int PyObject_DelAttr(PyObject *o, PyObject *attr_name)
Part of the 안정 ABI 버전 3.13 이후로.

객체 o에 대해, attr_name이라는 이름의 어트리뷰트를 삭제합니다. 실패 시 -1을 반환합니다. 이것은 파이썬 문장 del o.attr_name과 동등합니다.

int PyObject_DelAttrString(PyObject *o, const char *attr_name)
Part of the 안정 ABI 버전 3.13 이후로.

This is the same as PyObject_DelAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

The number of different attribute names passed to this function should be kept small, usually by using a statically allocated string as attr_name. For attribute names that aren’t known at compile time, prefer calling PyUnicode_FromString() and PyObject_DelAttr() directly. For more details, see PyUnicode_InternFromString(), which may be used internally to create a key object for lookup.

PyObject *PyObject_GenericGetDict(PyObject *o, void *context)
반환값: 새 참조. Part of the 안정 ABI 버전 3.10 이후로.

__dict__ 디스크립터의 게터(getter)를 위한 일반적인 구현. 필요하면 딕셔너리를 만듭니다.

This function may also be called to get the __dict__ of the object o. Pass NULL for context when calling it. Since this function may need to allocate memory for the dictionary, it may be more efficient to call PyObject_GetAttr() when accessing an attribute on the object.

On failure, returns NULL with an exception set.

Added in version 3.3.

int PyObject_GenericSetDict(PyObject *o, PyObject *value, void *context)
Part of the 안정 ABI 버전 3.7 이후로.

__dict__ 디스크립터의 세터(setter)를 위한 일반적인 구현. 이 구현은 딕셔너리 삭제를 허락하지 않습니다.

Added in version 3.3.

PyObject **_PyObject_GetDictPtr(PyObject *obj)

Return a pointer to __dict__ of the object obj. If there is no __dict__, return NULL without setting an exception.

This function may need to allocate memory for the dictionary, so it may be more efficient to call PyObject_GetAttr() when accessing an attribute on the object.

PyObject *PyObject_RichCompare(PyObject *o1, PyObject *o2, int opid)
반환값: 새 참조. Part of the 안정 ABI.

opid에 의해 지정된 연산을 사용하여 o1o2의 값을 비교합니다. opidPy_LT, Py_LE, Py_EQ, Py_NE, Py_GT 또는 Py_GE 중 하나여야 하고 각각 <, <=, ==, !=, > 또는 >=에 해당합니다. 이는 파이썬 표현식 o1 op o2와 동등합니다. 여기서 opopid에 해당하는 연산자입니다. 성공 시 비교 값을, 실패 시 NULL을 반환합니다.

int PyObject_RichCompareBool(PyObject *o1, PyObject *o2, int opid)
Part of the 안정 ABI.

Compare the values of o1 and o2 using the operation specified by opid, like PyObject_RichCompare(), but returns -1 on error, 0 if the result is false, 1 otherwise.

참고

o1o2가 같은 객체이면, PyObject_RichCompareBool() 은 항상 Py_EQ의 경우는 1을, Py_NE의 경우는 0을 반환합니다.

PyObject *PyObject_Format(PyObject *obj, PyObject *format_spec)
Part of the 안정 ABI.

Format obj using format_spec. This is equivalent to the Python expression format(obj, format_spec).

format_spec may be NULL. In this case the call is equivalent to format(obj). Returns the formatted string on success, NULL on failure.

PyObject *PyObject_Repr(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI.

객체 o의 문자열 표현을 계산합니다. 성공하면 문자열 표현을, 실패하면 NULL을 반환합니다. 이것은 파이썬 표현식 repr(o)와 동등합니다. repr() 내장 함수에 의해 호출됩니다.

버전 3.4에서 변경: 이 함수에는 이제 디버그 어서션이 포함되어 있어 활성 예외를 조용히 버리지 않도록 합니다.

PyObject *PyObject_ASCII(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI.

PyObject_Repr()처럼, 객체 o의 문자열 표현을 계산하지만, \x, \u 또는 \U 이스케이프를 사용하여 PyObject_Repr()이 반환한 문자열에서 비 ASCII 문자를 이스케이프 합니다. 이것은 파이썬 2에서 PyObject_Repr()에 의해 반환된 것과 유사한 문자열을 생성합니다. ascii() 내장 함수에 의해 호출됩니다.

PyObject *PyObject_Str(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI.

객체 o의 문자열 표현을 계산합니다. 성공 시 문자열 표현을, 실패 시 NULL을 반환합니다. 이것은 파이썬 표현식 str(o)와 동등합니다. str() 내장 함수에 의해, 따라서 print() 함수에 의해서도 호출됩니다.

버전 3.4에서 변경: 이 함수에는 이제 디버그 어서션이 포함되어 있어 활성 예외를 조용히 버리지 않도록 합니다.

PyObject *PyObject_Bytes(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI.

객체 o의 바이트열 표현을 계산합니다. 실패하면 NULL을, 성공하면 바이트열 객체를 반환됩니다. 이는 o가 정수가 아닐 때 파이썬 표현식 bytes(o)와 동등합니다. bytes(o)와 달리, o가 정수이면 0으로 초기화된 바이트열 객체 대신 TypeError가 발생합니다.

int PyObject_IsSubclass(PyObject *derived, PyObject *cls)
Part of the 안정 ABI.

클래스 derived가 클래스 cls와 동일하거나 cls에서 파생되었으면 1을 반환하고, 그렇지 않으면 0을 반환합니다. 에러가 발생하면 -1을 반환합니다.

cls가 튜플이면, cls의 모든 항목에 대해 검사가 수행됩니다. 적어도 하나의 검사에서 1을 반환하면 결과는 1이 되고, 그렇지 않으면 0이 됩니다.

cls__subclasscheck__() 메서드가 있으면, PEP 3119에 설명된 대로 서브 클래스 상태를 판별하기 위해 호출됩니다. 그렇지 않으면, derived가 직접 또는 간접 서브 클래스일 때 cls의 서브 클래스입니다, 즉 cls.__mro__에 포함되어 있습니다.

일반적으로 클래스 객체(즉 type이나 파생 클래스의 인스턴스)만 클래스로 간주합니다. 그러나, 객체는 __bases__ 어트리뷰트(베이스 클래스의 튜플이어야 합니다)를 가짐으로써 이를 재정의할 수 있습니다.

int PyObject_IsInstance(PyObject *inst, PyObject *cls)
Part of the 안정 ABI.

instcls 클래스나 cls의 서브 클래스의 인스턴스이면 1을 반환하고, 그렇지 않으면 0을 반환합니다. 에러가 발생하면 -1을 반환하고 예외를 설정합니다.

cls가 튜플이면, cls의 모든 항목에 대해 검사가 수행됩니다. 적어도 하나의 검사에서 1을 반환하면 결과는 1이 되고, 그렇지 않으면 0이 됩니다.

cls__instancecheck__() 메서드가 있으면, PEP 3119에 설명된 대로 서브 클래스 상태를 판별하기 위해 호출됩니다. 그렇지 않으면, inst는 해당 클래스가 cls의 서브 클래스일 때 cls의 인스턴스입니다.

인스턴스 inst__class__ 어트리뷰트를 가짐으로써 클래스로 간주하는 것을 재정의할 수 있습니다.

객체 cls__bases__ 어트리뷰트(베이스 클래스의 튜플이어야 합니다)를 가짐으로써, 클래스로 간주하는지와 베이스 클래스가 무엇인지를 재정의할 수 있습니다.

Py_hash_t PyObject_Hash(PyObject *o)
Part of the 안정 ABI.

객체 o의 해시값을 계산하고 반환합니다. 실패하면 -1을 반환합니다. 이것은 파이썬 표현식 hash(o)와 동등합니다.

버전 3.2에서 변경: 반환형은 이제 Py_hash_t입니다. 이것은 Py_ssize_t와 같은 크기의 부호 있는 정수입니다.

Py_hash_t PyObject_HashNotImplemented(PyObject *o)
Part of the 안정 ABI.

type(o)해시 가능하지 않음을 나타내는 TypeError를 설정하고 -1을 반환합니다. 이 함수는 tp_hash 슬롯에 저장될 때 특수한 처방을 받아서, 인터프리터에 형이 해시 가능하지 않음을 명시적으로 알립니다.

int PyObject_IsTrue(PyObject *o)
Part of the 안정 ABI.

객체 o를 참으로 간주하면 1을, 그렇지 않으면 0을 반환합니다. 이것은 파이썬 표현식 not not o와 동등합니다. 실패하면 -1을 반환합니다.

int PyObject_Not(PyObject *o)
Part of the 안정 ABI.

객체 o를 참으로 간주하면 0을, 그렇지 않으면 1을 반환합니다. 이것은 파이썬 표현식 not o와 동등합니다. 실패하면 -1을 반환합니다.

PyObject *PyObject_Type(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI.

oNULL이 아니면, 객체 o의 객체 형에 해당하는 형 객체를 반환합니다. 실패하면 SystemError를 발생시키고 NULL을 반환합니다. 이것은 파이썬 표현식 type(o)와 동등합니다. 이 함수는 반환 값에 대한 새로운 강한 참조를 만듭니다. 새로운 강한 참조가 필요할 때를 제외하고, PyTypeObject* 형의 포인터를 반환하는 Py_TYPE() 함수 대신 이 함수를 사용할 이유가 없습니다.

int PyObject_TypeCheck(PyObject *o, PyTypeObject *type)

객체 otype 형이거나 type의 서브 형이면 0이 아닌 값을 반환하고, 그렇지 않으면 0을 반환합니다. 두 매개 변수 모두 NULL이 아니어야 합니다.

Py_ssize_t PyObject_Size(PyObject *o)
Py_ssize_t PyObject_Length(PyObject *o)
Part of the 안정 ABI.

객체 o의 길이를 반환합니다. 객체 o가 시퀀스와 매핑 프로토콜을 제공하면, 시퀀스 길이가 반환됩니다. 에러가 발생하면 -1이 반환됩니다. 이것은 파이썬 표현식 len(o)와 동등합니다.

Py_ssize_t PyObject_LengthHint(PyObject *o, Py_ssize_t defaultvalue)

o 객체의 추정된 길이를 반환합니다. 먼저 실제 길이를 반환하려고 시도한 다음, __length_hint__()를 사용하여 추정값을 반환하고, 마지막으로 기본값을 반환합니다. 에러 시 -1을 반환합니다. 이것은 파이썬 표현식 operator.length_hint(o, defaultvalue)와 동등합니다.

Added in version 3.4.

PyObject *PyObject_GetItem(PyObject *o, PyObject *key)
반환값: 새 참조. Part of the 안정 ABI.

객체 key에 해당하는 o의 요소를 반환하거나 실패 시 NULL을 반환합니다. 이것은 파이썬 표현식 o[key]와 동등합니다.

int PyObject_SetItem(PyObject *o, PyObject *key, PyObject *v)
Part of the 안정 ABI.

객체 key를 값 v에 매핑합니다. 실패 시 예외를 발생시키고 -1을 반환합니다; 성공하면 0을 반환합니다. 이것은 파이썬 문장 o[key] = v와 동등합니다. 이 함수는 v에 대한 참조를 훔치지 않습니다.

int PyObject_DelItem(PyObject *o, PyObject *key)
Part of the 안정 ABI.

객체 o에서 객체 key에 대한 매핑을 제거합니다. 실패하면 -1을 반환합니다. 이것은 파이썬 문장 del o[key]와 동등합니다.

int PyObject_DelItemString(PyObject *o, const char *key)
Part of the 안정 ABI.

This is the same as PyObject_DelItem(), but key is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

PyObject *PyObject_Dir(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI.

이것은 파이썬 표현식 dir(o)와 동등하며, 객체 인자에 적합한 문자열의 (비어있을 수 있는) 리스트를 반환하거나, 에러가 있으면 NULL을 반환합니다. 인자가 NULL이면, 파이썬 dir()과 비슷하며, 현재 지역(locals)의 이름들을 반환합니다; 이 경우, 실행 프레임이 활성화되어 있지 않으면 NULL이 반환되지만 PyErr_Occurred()는 거짓을 반환합니다.

PyObject *PyObject_GetIter(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI.

이것은 파이썬 표현식 iter(o)와 동등합니다. 객체 인자에 대한 새로운 이터레이터를 반환하거나, 객체가 이미 이터레이터이면 객체 자체를 반환합니다. 객체를 이터레이트 할 수 없으면 TypeError를 발생시키고 NULL을 반환합니다.

PyObject *PyObject_SelfIter(PyObject *obj)
반환값: 새 참조. Part of the 안정 ABI.

This is equivalent to the Python __iter__(self): return self method. It is intended for iterator types, to be used in the PyTypeObject.tp_iter slot.

PyObject *PyObject_GetAIter(PyObject *o)
반환값: 새 참조. Part of the 안정 ABI 버전 3.10 이후로.

이것은 파이썬 표현식 aiter(o)와 동등합니다. AsyncIterable을 받아서 그 것의 AsyncIterator를 반환합니다. 보통 새 이터레이터이지만, 인자가 AsyncIterator면 그 자신을 반환합니다. 객체를 이터레이트 할 수 없으면 TypeError를 발생시키고 NULL을 반환합니다.

Added in version 3.10.

void *PyObject_GetTypeData(PyObject *o, PyTypeObject *cls)
Part of the 안정 ABI 버전 3.12 이후로.

Get a pointer to subclass-specific data reserved for cls.

The object o must be an instance of cls, and cls must have been created using negative PyType_Spec.basicsize. Python does not check this.

On error, set an exception and return NULL.

Added in version 3.12.

Py_ssize_t PyType_GetTypeDataSize(PyTypeObject *cls)
Part of the 안정 ABI 버전 3.12 이후로.

Return the size of the instance memory space reserved for cls, i.e. the size of the memory PyObject_GetTypeData() returns.

This may be larger than requested using -PyType_Spec.basicsize; it is safe to use this larger size (e.g. with memset()).

The type cls must have been created using negative PyType_Spec.basicsize. Python does not check this.

On error, set an exception and return a negative value.

Added in version 3.12.

void *PyObject_GetItemData(PyObject *o)

Get a pointer to per-item data for a class with Py_TPFLAGS_ITEMS_AT_END.

On error, set an exception and return NULL. TypeError is raised if o does not have Py_TPFLAGS_ITEMS_AT_END set.

Added in version 3.12.

int PyObject_VisitManagedDict(PyObject *obj, visitproc visit, void *arg)

Visit the managed dictionary of obj.

This function must only be called in a traverse function of the type which has the Py_TPFLAGS_MANAGED_DICT flag set.

Added in version 3.13.

void PyObject_ClearManagedDict(PyObject *obj)

Clear the managed dictionary of obj.

This function must only be called in a traverse function of the type which has the Py_TPFLAGS_MANAGED_DICT flag set.

Added in version 3.13.